BIANCHI VENDING BVM972 Use And Maintenance Manual page 25

4.6.2 Cup loading
Use only cups suitable for automatic vending machines,
the relevant features by consulting the chapter 1.0 "Technical
Specifi cations."), avoid compressing the cups between
during the loading. Don't try to rotate the turret manually.
First fi lling
In installation phase with the cup dispenser completely empty,
operate as follows:
– Check that the cup column is not aligned with the distribution
outlet, then fi ll all the columns proceeding in an anti-clockwise
sense, opposite sense (when the column is aligned with the
distribution outlet), close the door and switch on the machine
so that the cup column rotates and automatically places itself
in a position in which it is not aligned with the inlet and then
proceed to fi ll (Fig.4.28)
– Put the cup turret's lid back on and snap in the spring band
(Fig. 4.29).
Normal fi lling
The cup column should normally fi lled with the machine off, simply
by opening the front door, lifting the lid and inserting the missing
cups.
(check
themselves
Fig. 4.28
Fig. 4.29
25