BIANCHI VENDING BVM972 Use And Maintenance Manual page 67

6.8 Inactivity
If the automatic vending machine remains inactive for a long time
it is necessary to perform some prevention operations:
– disconnect the machine electrically and hydraulically.
– empty completely the instant boiler and the fl oater reservoir
removing the plug located on the hose along the drain chute
(Fig. 6.25).
– Put the plug back in once the draining has been done.
– unload all the product from the containers
– perform a thorough cleaning of all the parts in contact with food
substances according to what has already been described.
– empty the liquid waste bin carefully
– eliminate the spent grounds bag
– clean with a cloth all the internal and external surfaces of the
machine.
– protect the outisde of the machine with a plastic fi lm wrapping
or bag (fi g. 6.26)
– stock in a dry and protected place where the temperature is
not less than 1° C.
7.0 DISMANTLEMENT
Proceed with the emptying of the products and of the water as
described in the previous paragraph.
For the dismantlement we advise to disassemble the machine
dividing the parts according to their composition (plastic, metal
etc.).
Subsequently entrust to specialised companies the parts divided
in this manner.
Attention! Check that the machine disposal is perfomed with
respect of environmental rules and according to the regulations
in force
Fig.6.25
Fig.6.26
67