BIANCHI VENDING BVM972 Use And Maintenance Manual page 37

Custom Messages Management of messages to be customized
only in WinBianchi [On/Off]
All drinks? Manages the automatic grinding also for
compound drinks ( Yes/NO )
Displayed only with Bianchi Development
Yes: Grinding control takes place also on
drinks with more than one EV (e.g. Cappuc-
cino )
No. Automatic grinding control takes place
on espresso coffee only (strong and weak).
Always spoon Enables spoon management- Yes/No. If
always spoon yes, the spoon is always pro-
vided, if always spoon no, the item spoon will
appear in the doses menu. It will therefore be
possible for any drink to manage the spoon
supply.
Spoon after Yes/No If No the spoon is supplied upon selection
beginning, if Yes the soppon is supplied after
sugar in sweet drinks and after water dose
in bitter drinks.
Enabl. Sens. Vega x Enables product fall sensor management on
Vega distributors.
If Yes the product fall sensor is enabled. A cold
selection is succesful if the sensor detects
the product passage. If not, the distributor
will communicate the failed sale to the coin
box.
If No, nothing checks the dispensing.
Sugar Espresso Enables the sugar management as for espres-
so machines [Yes/No]
Spiral Sequence Enables the Spiral Sequence option [Yes/No]
( Vega 6xx ).
It allows to select different spirals and ma-
nage them with one code.
For example, this option is used when diffe-
rent spirals have the same type of product.
The spirals of this group, at every selection,
will activate in sequence and supply one pro-
duct each. The Extra times for every single
spiral as well as the cabinet attempts will
however be respected.
Below is the programming procedure:
Item No.1
With at least one Vega Slave linked and operating, the Spiral Se-
quence menu will be displayed:
Spiral sequence
menu selection
In the menu by pressing ENTER the following will be displayed:
Spiral Sequence
Group 1A
where the number shows the group that can range from 1 to 12
and the letter shows if it is referred to Vega A or Vega B, therefore
the sequence will be: 1A ... 12A, 1B ... 12B.
Item No. 2:
After selecting the group to be modifi ed, using keys INC to increase
or DEC to decrease the digits and confi rming with ENTER, enter
the programming of the spirals related to the selected group:
where in the fi rst line the number x [1 ÷ 12] will appear refer-
ring to the selected group and the indication of Vega A or B, the
2nd line will show NN which is the number of spirals related to
group x and is a value that can only be displayed and cannot be
programmed;letter W specifi ed whether the group is referred to
Vega 1 or 2 and digits YY refer to the code of the spiral belonging
to the group.
After entering the menu, the fi rst spiral belonging to the group
will be displayed, or in case of an empty group NN will be di-
splayed equal to 0 and code A 00 or B 00 according to the Vega
machine.
Now there are two options: eliminating one or more spirals or
adding one or more spirals in the selected group, unless this is a
previously empty group; if so, it is only possible to add one or more
spirals. To eliminate a spiral: using ENTER all spirals belonging to
the selected group can be scrolled.
After selecting the spiral to be eliminated, press key 5 to eliminate
it (cursor), the number of available spirals (NN) will decrease by
one unit and code (YY) will show one available spiral.
It is also possible to directly select the spiral, using INC and DEC
keys and press key 5. Obviously if the selected spiral does not
belong to that group, nothing will happen. The eliminated spirals
belong to no group.
To add a spiral: within the group using INC and DEC keys select
the spiral to be added. Press ENTER to couple the spiral to the
group. the number of available spirals (NN) will increase. If the
selected spiral belonged to another group. this operation implies
the elimination of the spiral from the previous group to be added
to the new group.
Sugar Bar Yes/No If YES, the sugar bar will be displayed with
all squares empty (and not with four full squares and
four empty squares)
Given that the sugar management of this option
follows the formula:
Sugar= A + B/8
Where:
A= Sugar dose in the doses menu for every drink
B= Sugar dose in the Preselections menu – Increase
product
Therefore to have a basic sugarless drink it is neces-
sary to set A=0 and all squares empty – therefore no
pressing of Increase key
To have a sweetened drink press INC preselection to
increase.
For example, if in the preselections menu sugar is
set at 8 seconds, for every sugar square selected a
second of product will be provided.
Enable Door Sw The door contact management is enabled by
programming the "Enabl.Door SW" to Yes.
In this condition, an "Open Door" message will be
sent when the door is opened (with distributor on)
and the opening time count will start and stored every
10 seconds.
When the door is closed a new SMS message will
be sent "Close Door: time 7m 40s" to show that the
37
Group x A
NN W YY