BIANCHI VENDING BVM972 Use And Maintenance Manual page 8

PREMISE
I Important notices for operator
This automatic distributor has been designed and constructed in
full accordance with current safety regulations and is therefore safe
for those who follow the ordinary fi lling and cleaning instructions
as indicated in this manual.
The user must not under any circumstances remove the
guards that require a tool for removal.
Some maintenance operations (to be done solely by specialized
technicians and indicated in this manual with a special symbol)
require that specifi c safety protections of the machine must be
switched off .
In accordance with the current safety regulations, certain opera-
tions are the exclusive responsibility of the installation technician,
and the ordinary maintenance technician may have access to
specifi c operations on with specifi c authorization.
The acquaintance and absolute respect, from a technical point of
view, of the safety instructions and of the danger notices contained
in this manual, are fundamental for the execution, in conditions
of minimum risk, for the installation, use and maintenance of
this machine.
II General Instructions
Knowledge of the
contained in the present manual is essential for
a correct use of the automatic vending machine
on the part of the user .
– Interventions by the user on the automatic vending machine
are allowed only if they are of his competence and if he has
been duly trained.
The installation technician must be fully acquainted with all
the mechanisms necessary for the correct operation of the
machine.
– It is the buyer's responsibility to ascertain that the users have
been trained and are informed and regulations indicated in the
technical documentation supplied.
Despite the full observance of the safety regulations by the
constructor, those who operate on the automatic dispensers
must be fully aware of the potential risks involved in operations
on the machine.
– This manual is an integral part of the equipment and as such
must always remain inside of the same, so as to allow further
consultations on the part of the various operators, until the
dismantlement and/or scrapping of the machine.
– In case of loss or damage of the present manual it is possible
receive a new copy making application to the manufacturer,
with prior indication of the data registered on machines' serial
number.
– The functional reliability and optimization of machine's ser-
vices are guaranteed only if original parts are used.
– Modifi cations to the machine not previously agreed on with
the construction company and undertaken by the installation
technician and/or manager, are considered to be under his
entire responsibility.
All the operations necessary to maintain the machine's effi -
ciency, before and during it's use are at the users charge.
information and instructions
– Any manipulations or modifi cations made to the machine that
are not previously authorized by the manufacturer, relieve
the latter from any responsibility for damages deriving from,
and will automatically result in the cancellation of the machine
guarantee terms.
– This manual refl ects the status at the moment of the emission
of the automatic vending machine on the market; possible
modifi cations, upgrading, adaptments that are done the ma-
chine and that are subsequently commercialized do not oblige
BIANCHI VENDING GROUP Spa neither to intervene on the
machine previously supplied, nor, neither to update the relative
technical documentation supplied together with the machine.
– It is however BIANCHI VENDING's Group faculty, when
deemed opportune and for valid motives, to adjourn the ma-
nuals already present on the market, sending to their customers
adjournment sheets that must be kept in the original manual.
Possible technical problems that could occur are easily resolvable
consulting this manual ; For further information, contact the di-
stributor from whom the machine has been purchased, or contact
Bianchi Vending's Technical Service at the
035 4196711 - fax 02 70048332
When calling it is advisable to be able to give the following infor-
mation:
The data registered on the serial number label (Fig.1)
version of program contained in the microprocessor (Adhesive
label on the component installed on board).
FIG.1
8
following numbers: