BIANCHI VENDING BVM972 Use And Maintenance Manual page 48

5.3.12 'Preventive Action' Menu
Water fi lter Water fi lter decounter value [0÷99999]
Boiler Boiler decounter value [0÷99999]
HACCP HACCP Sanitization
[0÷99999]
Electrovalves Electrovalve decounter value [0÷99999]
Gaskets Gasket decounter value [0÷99999]
Boiler 2 Boiler decounter value [0÷99999]
Water fi lter Water fi lter decounter value [0÷99999]
Coffee blades Coffee blade decounter value [0÷99999]
Coffee fi lters Coffee fi lter decounter value [0÷99999]
FB 1 fi lter Fresh Brew fi lter 1 decounter value
[0÷99999]
FB 2 fi lter Fresh Brew fi lter 2 decounter value
[0÷99999]
5.3.13 'Decounters and Reserves' menu
Decount powders? Yes/No (If "Yes" it requires the decount para-
meters relevant to powders. When decount.
= 0 supply disabled)
Decount sectors? Yes/No (If "Yes" it requires the decount para-
meters relevant to sectors. When decount. =
0 supply disabled). The data to be set can be
sent and modifi ed using WinBianchi via cable
and modem.It also displays on WinBianchi
the Reserve Sector Parameter.
Decount beans? Yes/No (If "Yes" it requires the decount para-
meters relevant to beans. When decount. =
0 supply disabled). It also displays Reserve
beans.
Decount cups? Yes/No (If "Yes" it requires the decount para-
meters relevant to cups. When decount. = 0
supply disabled). If the cup sensor is installed
it allows to supply drinks only with their own
cup. It also displays Reserve Cups
Reserve powders? [On/Off] Enables the management of powder
reserve. When the distributor goes to reserve
it will send an sms/ data call to the operating
central unit.
Reserve Sectors? [On/Off] Enables the management of sector
reserve. When the distributor goes to reserve
it will send an sms/ data call to the operating
central unit.. Only via cable or modem using
WinBianchi.
Reserve beans? [On/Off] Enables the management of bean
reserve. When the distributor goes to reserve
it will send an sms/ data call to the operating
central unit.
Enable Reset? Enables the management of the reset button
of decounters in maintenance mode [On/
Off]. Upon confi rmation of every decounter
the electronics will store, by duplicating
them, the values not yet decounted in safe
memory locations. Whenever the operator
goes to maintenance mode he will be able,
using a dedicated button, to return the
decounters to the initial parameter. Check
the possibility to automatically reset upon
operator passage.
Dec. Powder 1 Decounter value-Powder 1 [0÷1677721s]
...
Dec. Powder 8 Decounter value- Powder 8 [0÷1677721s]
The decount value to be entered the Dec.
Powder X is determined by measuring for
every second of product preparation the
decounter value
Dec.Sect/Col XX
Dec.Beans
Dec.Cups
Reserve Powder 1
Reserve Powder 9
Reserve beans
Reserve cups
Chip Card?
48
quantity of grams provided. The result must
be multiplied by the total quantity of product
in the container.
Example :
Chocolate 1sec = 4 g i.e. 1g = 0,25'sec
Chocolate in the container = 1000 g
Dec. Powder 8 = 1000g * 0,25sec = 250
sec.
Decounter value- Sector /Column XX [.......]
Decounter value- coffee beans[.......]
Decounter value- cups [.......]
Reserve value – Powder 1 [.......]
Reserve value –Powder 9 [.......]
Reserve value – Coffee beans [.......]
Reserve value –cups [.......]
[On/Off] It enables the Chip card manage-
ment. Every Chip Card, in addition to its own
data, features three types of stored codes:
machine, location and customer codes. When
the chip card is inserted in the relevant con-
nector a check is made to make sure that the
codes in the key coincide with the machine
codes. Any code not present in the chip card
is not checked and therefore if no code is
present the check will not be carried out.
It is also possible to make settings on the
chip card (via windows program) that allow
to select the codes on which to perform the
check. The Decount chip card is used to
update the decounters of the machine by
adding the stored recharge to the residual
value.
To be enabled to operate the key must have,
in addition to the correct three codes, if pre-
sent (machine, location and customer), also
the recharge value other than zero as well
as an identifi cation code of the key under
reference not included in the list stored in
the machine Eeprom. This list is updated
with the code of the key used after the re-
charge operation has been properly fi nished.
Moreover, along with this operation, the two
recharge values of the stored decounters is
cancelled in order to avoid any possibility of
re-using the key. To be noted that disabling
the key by saving the code and cancelling the
recharge will occur only after the update has
been completed correctly. Any early removal
of the key or any sudden voltage drop will
not affect the proper operation of the key;
therefore when the regular operating condi-
tions are restored (key inserted and power
supply steady) the operation can be correctly
completed.
With CHIP CARD decounters are always
blocking. Without it, they become signallin-
gs.