BIANCHI VENDING BVM972 Use And Maintenance Manual page 45

5.3.7 'Payment systems' Menu
5.3.7.0 General Parameters
Protocol Selection of Payment System (Up-Down Scroll
menu)
Credit Timeout Management of credit timeout before going
to overpay [ 0-180s ]
Multivend Enables multisale [On/Off]. If ON the credit
will permanently remain on the display and
bypass the set timeout. If OFF the credit
timeout will be managed
Decimal point Decimal point [00000, 0000.0, 000.00,
00.000] For Parallel protocol only.
If the Validator is selected, the distributor will alwyas be in Exact
Change mode.
Immediate Change Enables distribution of the instant change
if a hot selection is made [On/Off] Priority
on Multivend. Displayed only if Executive
Protocol.
Fixed in line 1-2 Enables message "Enter exact change" fi xed
on the display if the coin box cannot give
change
Price Timeout Price timeout (only for ECS or price holding)
[2.0÷25.0 s]
Fixed in line 1-2 Enables message "Enter exact change" fi xed
on the display if the coin box cannot give
change
Immediate Change Enables distribution of the instant change
if a hot selection is made [On/Off] Priority
on Multivend. Displayed only if Executive
Protocol.
Price Holding
Price Timeout Price timeout (only for ECS or price holding)
[2.0÷25.0 s]
Price Table ( Yes/No) If NO the price table is unique and manages
50 prices ( 1 –50 ).
If YES the price table is subdivided into two
tables.
First table 1 –25. Second table 26 (25+1) 50
(25+25)
Credit Timeout Management of credit timeout before going
to overpay [0...180s]
Multivend Enables multisale [On/Off]. If ON the credit
will permanently remain on the display and
bypass the set timeout. If OFF the credit
timeout will be managed
Fixed in line 1-2 Enables message "Enter exact change" fi xed
on the display if the coin box cannot give
change
Ignore Exact Change
1- Confi guration MDB Coin box+ Banknote
reader: if the coin box cannot give the change
the banknotes will not be accepted;
2- Configuration MDB Coin box+Cash
less+Banknote reader: The reader is enabled
only to recharge keys.
1- Confi guration MDB Coin box+Banknote
reader: if the coin box cannot give the change
the banknotes will be accepted;
Parallel
Executive
ECS diff.
MDB
OFF
ON:
2- Configuration MDB Coin box+Cash
less+Banknote reader: The reader is enabled
only to recharge keys.
Max.change Max.change than can be given by the coin
box[0÷9999]
Coin changer Enables the change lever [Yes/No]
Max coin credit Max.credit accepted by the coin box
[0÷65535]
Max credit on key Max.credit that can be changed on the
key[0÷65535]
Ignore ExChg Ignores coin inhibitions of in 'exact change'
[Yes/No]
Min Lev tube 1 X Selects minimum quantity in tube 1 [1...20]
Min Lev tube 2 X Selects minimum quantity in tube 2 [1...20]
Min Lev tube 3 X Selects minimum quantity in tube 3 [1...20]
Min Lev tube 4 X Selects minimum quantity in tube 4 [1...20]
Min Lev tube 5 X Selects minimum quantity in tube 5 [1...20]
Enab. TOKEN Enables TOKEN [On/Off]
Token Sets the value of Token 1 [000.00÷999.99]Ena-
bled only if Enab.Token On
Token 2 Sets the value of Token 2 [000.00÷999.99]
Enabled only if Enab.Token On
Token 3 Sets the value of Token 3 [000.00÷999.99]
Enabled only if Enab.Token On
Change x Token Enables change if token value is > than se-
lection [Y/N] Enabled only if Enab.
Token On
Recharge Token Enables recharge of token value on key [Y/N]
Enabled only if Enab.Token On
Ex.Chg. & Token Inhibits the acceptance of tokens when the
machine is in Exact Change [Y/N] Enabled
only if Enab.Token On
During the reset phase the payment system is inhibited.
5.3.7.1 Coins/Line
Coin 1 Associazione moneta - linea 1
[0÷65535]
...
MCoin 16 Associazione moneta - linea 16 [0÷65535]
5.3.7.2 Banconote/Linea
Banconota 1 Coin - line 1 association [0÷65535]
...
Banconota 16 Coin - line 16 association [0÷65535]
5.3.7.3 Banknote/Line
Banknote 1 Banknote - line 1 association [0÷65535]
...
Banknote 16 Banknote - line 16 association [0÷65535]
5.3.7.4 Enabling coins
Coin 1 Enables coin 1 [On/Off]
...
Coin 16 Enables coin 16 [On/Off]
45