BIANCHI VENDING BVM972 Use And Maintenance Manual page 54

Setup Section
In this section you will enter the number of the service center of
the chosen operator and write it in the relevant window, then you
will press the Set GSM key.
Receiving an Alarm signalling
When you receive an alarm message from a distributor, a window
will be opened on the computer desktop showing the number from
which it was sent, the date and the time while the bigger window
will show the type of alarm and when it occurred.
Moreover, if it corresponds to one of the numbers of the distributors
stored in the program database, the following data will appear:
type of machine (Distributor); Customer at which the machine is
installed (Sale Point) and the operator in charge (Operator).
Now you can store the received SMS in the list of the "GSM"
format of the database (OK key) or you can send the message to
the operator in charge (Send key) and in the window appearing
again by pressing Send key.
5.3.18.2 Modules Telemetry
This management can be enabled via an option. For specifi cations
please refer to TROLL/Modules protocol.
5.3.19 Menu 'Item Number Cold
code cold XXX Sets the ITEM NUMBER code for sector or
column XXX [0÷254]
...
code cold XXX Sets the ITEM NUMBER code for sector or
column XXX [0÷254]
54