Figure 4-5 Installing The Device On The Guide Rail; Figure 4-6 Pulling Downward The Device - Raisecom Gazelle S1000i-LI User Manual

Raisecom
Gazelle S1000i-LI (A) User Manual

Figure 4-5 Installing the device on the guide rail

Step 3 Ensure that the rail clip assembly is connected to the guide rail tightly.
Removing device from guide rail
Remove the Gazelle S1000i-LI from the guide rail as below:
Step 1 Pull downward the device to make a gap between the rail clip and the guide rail, as shown in
Figure 4-6.

Figure 4-6 Pulling downward the device

Step 2 Pull the device bottom in the opposite direction of the guide rail to lean it and remove the rail
clip bottom from the guide rail, as shown in Figure 4-7.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
4 Hardware installation
50