Figure 4-7 Removing The Rail Clip Bottom From The Guide Rail; Figure 4-8 Removing The Device From The Guide Rail - Raisecom Gazelle S1000i-LI User Manual

Raisecom
Gazelle S1000i-LI (A) User Manual

Figure 4-7 Removing the rail clip bottom from the guide rail

Step 3 Pull upward the device lightly and the spring clip is bounced. This operation separates the rail
clip top from the guide rail. Then remove the device from the guide rail, as shown in Figure
4-8.

Figure 4-8 Removing the device from the guide rail

Remove the Gazelle S1000i from the guide rail as below:
Step 1 Slide downward the sliding connector to separate it from the guide rail, as shown in Figure 4-
9.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
4 Hardware installation
51