Wan Protocols; Mib Support - Cabletron Systems WPIM T1 User Manual

A connection can only be chosen for either T1 or DDS service
NOTE
in Local Management. Both services cannot operate at the
same time.
1.3

WAN PROTOCOLS

The module in which the WPIM-T1/DDS is installed supports the
following WAN protocols (refer to the Release Notes included with the
host MIM or standalone hub for a list of current protocols):
• Point to Point Protocol (PPP) and as defined by RFC 1661
• Frame Relay as defined by RFC 1490
• ISDN as defined by Q.921 and Q.931
1.4

MIB SUPPORT

Refer to the Release Notes included with the host platform for a list of all
MIBs supported by the WPIM-T1/DDS. For information about how to
extract and compile individual MIBs, contact Cabletron Systems (refer to
Getting Help).
WPIM-T1/DDS User's Guide
WAN Protocols
1-3