Ppp As The Protocol Manager - Cabletron Systems WPIM T1 User Manual

DLCI DCP Stat (Read-Only)
Displays the current negotiated status of compression.
Comp Ratio (Read-Only)
Displays the Compression Ratio, which is the ratio of uncompressed to
compressed data.
Circuit State (Selectable)
The field initially displays the state of the DLCI circuit, and can be
modified. Steps through Active, Inactive and Invalid.
3.2.1.2

PPP as the Protocol Manager

<host name> Local Management
Interface Number:
Max Xmit Unit:
ProtMgrIface:
Active Protocol:
PPP MRU:
ECP Enable:
ECP Status:
CCP Enable:
CCP Status:
Comp Ratio:
PORTS:
SAVE
[1-32]
Figure 3-5 WAN Interface Configuration Screen (PPP)
Refer to Figure 3-5
PPP MRU (Modifiable)
Displays the Maximum Receive Units that PPP can handle, modifiable by
the user.
ECP Enable (Toggle)
Toggles between On and Off to enable or disable encryption.
ECP Status (Read-Only)
Displays the status of encryption.
WPIM-T1/DDS User's Guide
The WAN Interface Configuration Screen
WAN INTERFACE CONFIGURATION
CKT# IF# LID STATE
003
001
1526
002
[0]
003
PPP
004
1520
005
006
[Off] 007
Off 008
009
010
[Off]
011
Off
012
1:1
013
014
015
RETURN
016
for the following parameters displayed for PPP.
Flash Image Version: xx.xx.xx
CKT# IF# LID STATE
017
001 Enet UP
018
002 Enet DOWN
019
020
021
022
023
024
025
026
027
028
029
030
031
032
2750_02
3-9