T1 Interface Cabling; A.4 T1 Interface Cabling; Cable Assemblies And Pinouts - Cabletron Systems WPIM T1 User Manual

Appendix A: Specifications
A.4

T1 INTERFACE CABLING

This appendix provides the Cabletron Systems part number and connector
information for the Interface Cables used in both the T1 and DDS modes
of the WPIM-T1/DDS.
Table A-1 lists Cabletron Systems part numbers for the interface cables
for T1 mode. A standard 20-foot cable is available or the customer may
specify the length of cable when ordering.
Table A-1 Cabletron T1 Cable Part Numbers
Interface Cable
T1 Line Interface Cable
1. Standard 20 foot T1 Line Interface Cable.
2. (L denotes length required in feet or meters). For example: 9372094-3
denotes a 3 foot cable; 9372094-3M denotes a 3 meter cable.
A.4.1

Cable Assemblies and Pinouts

The following section provides connector information for the T1 interface
cable.
Cabletron interface cable part number
Description
Connector 1
Connector 2
A-2
Table A-2 T1 Connector Information
Cabletron Part Number
9372094-20
2
9372094-L
9372094
T1 line interface cable
RJ48C
RJ48C
WPIM-T1/DDS User's Guide
1