Ppp As The Protocol Manager - Cabletron Systems WPIM T1 User Manual

4.2.1.2

PPP as the Protocol Manager

<host name> Local Management
Interface Number:
Max Xmit Unit:
ProtMgrIface:
Active Protocol:
PPP MRU:
ECP Enable:
ECP Status:
CCP Enable:
CCP Status:
Comp Ratio:
PORTS:
SAVE [1-32]
Figure 4-3 WAN Interface Configuration Screen (PPP)
Refer to Figure 4-3
PPP MRU (Modifiable)
Displays the modifiable Maximum Receive Units that PPP can handle.
ECP Enable (Toggle)
Toggles between On and Off to enable or disable encryption.
ECP Status (Read-Only)
Displays the status of encryption.
CCP Enable (Toggle)
Toggles between On and Off to enable or disable compression.
CCP Status (Read-Only)
Displays the status of compression.
Comp Ratio (Read-Only)
Displays the Compression Ratio, which is the ratio of uncompressed to
compressed data.
WPIM-T1/DDS User's Guide
WAN INTERFACE CONFIGURATION
CKT# IF# LID STATE
003
001
1526
002
[0]
003
PPP
004
1520
005
006
[Off] 007
Off 008
009
010
[Off]
011
Off
012
1:1
013
014
015
RETURN
016
for the following parameters displayed for PPP.
WAN Interface Configuration Screen
CKT# IF# LID STATE
017
001 Enet UP
018
002 Enet DOWN
019
020
021
022
023
024
025
026
027
028
029
030
031
032
Flash Image Version: xx.xx.xx
2750_02
4-7