Displaying Own Ship Track; Changing Track Color [When Equipped With The Plotter]; Selecting Track Storing Interval - JRC JMA-7710-6 Instruction Manual

3.6

Displaying Own Ship Track

The own ship track can be displayed only in the R+P (radar + plotter) or plotter mode (option NDB-33). The
display is not available in the radar mode.

3.6.1 Changing Track Color [When equipped with the plotter]

White, sky, blue, green, yellow, pink and red are available for the track color. The track is not displayed or
stored when "OFF" is selected.
1. Press the
Procedures
Procedures
2. Press the
Check that the track color is displayed in a box on the bottom of the screen.
3. Turn the
The track is displayed with the selected color.
Note
G If plotter (NDB-33) isn't combined, the track color can be displayed only sky in R+P mode.

3.6.2 Selecting Track Storing Interval

The range and time for storing the track can be selected from 3, 5, 10 and 30 seconds, 1, 3, 5, 10, 30 and 60
minutes, and 1, 3, 5 and 10 nm. Up to 20,000 track (with mark) can be stored.
1. Press the
Procedures Procedures
2. Press the
(or press the
3. Press the
(or press the
MEM INTERVAL".)
4. Press the
"1MIN", "3MIN", "5MIN", "10MIN", "30MIN", "60MIN", "1NM", "3NM", "5NM"
or "10NM".
(or press the
5. Press the
MAP
key to select R+P or plotter mode.
OWN
key twice.
TRK
COLOR
control to select the track color.
MAP
key to select R+P (radar + plotter) or plotter mode.
OWN
key to open the OWN TRACK menu.
TRK
SUB
4
and
MENU
2
key to select "OWN TRK MEM INTERVAL".
1
key on the RADAR #4 menu to select "OWN TRK
2
key to select "3SEC", "5SEC", "10SEC", "30SEC",
1
key on the RADAR #4 menu.)
ENT
key to confirm the setting.
3 – 79
keys to open the RADAR #4 menu.)