Honeywell NOTIFIER NFW-50X Manual page 57

Master Programming Level

Add Module
Pressing 1 while viewing the Modules Screen will display the following screen which allows the programmer to add a new module
address to programming:
A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in the three digit module address, such
as 005.
When the last digit is keyed-in, the following screen will be displayed:
Pressing 1 for Control Module, 2 for Wireless Control Module, 3 for Monitor Module, or 4 for Wireless Monitor Module will cause the
following screen to be displayed:
The programmer can continue adding modules by pressing the ESC or left arrow key which will return the display to the Add Module
Screen #1.

Delete Module
MODULES
1=ADD
2=DELETE
3=EDIT
Modules Screen
A flashing cursor will appear in the position of the first asterisk to the left. Using the panel keypad, key in the module address such as
005. When the last digit is keyed in, the following confirmation that the module has been deleted will be displayed:

Edit Module Screen for Monitor Module
The programmer can change a modules existing or factory default programming by pressing 3 in the Modules Screen. The following
screen will be displayed:
A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in the three digit module address, such
as 012. When the last digit is keyed-in, if the selected address has not been added to programming, a screen showing information about a
device that is installed with a lower address, closest to the selected address, will be displayed. If no modules are installed on the loop, the
following screen will be displayed:
NFW-50X Manual — P/N LS10129-001NF-E:C 7/25/2018
ENTER MODULE#

Add Module Screen #1
ADD MODULE
1=CON
2=CON:WL
Add Module Screen #2
MODULE#
IS ADDED (WIRELESS)
Add Module Screen #3
Pressing 2 in the Modules Screen will display the Delete Module Screen which allows the programmer to
delete a specific module:
DELETE MODULE
ENTER MODULE#

Delete Module Screen
DELETE MODULE
MODULE#
IS DELETED
EDIT MODULE
ENTER MODULE ADDRESS

Edit Module Screen
NO MODULE
INSTALLED
Edit Module Screen
ADD MODULE
3=MON
4=MON:WL
ADD MODULE
005
005
Programming
57