Controls And Indicators - Honeywell NOTIFIER NFW-50X Manual

Product Description
The following figure illustrates the maximum current that is possible for each major panel output circuit and the total current available
from the FACP.
Special Application
Remote Synchronization

1.3 Controls and Indicators

LCD Display
The FACP uses an 80-character
(4 lines X 20 characters) high viewing angle LCD display. The display includes a long life
LED backlight that remains illuminated. If AC power is lost and the system is not in alarm,
the LED backlight will turn off to conserve batteries.
Key Panel
Mounted on the main circuit board, the key panel includes a window for the LCD display
and LED indicators as listed below. The key panel, which is visible with the cabinet door closed, has 30 keys, including a 16 key alpha-
numeric pad similar to a telephone keypad.
14
TB11
Nonresettable or
Resettable Power
NAC #1
2.5 amps max
TB5
NAC #2
2.5 amps max
TB8
0.35 amp max
Output
Refer to the battery calculations section for additional information.
Figure 1.1 Current Availability
Standby
1.0 amp max
2.0 amps max
per circuit
per panel
per circuit
per circuit
per circuit
NFW-50X Manual — P/N LS10129-001NF-E:C 7/25/2018
Controls and Indicators
Alarm
3.0 amps max
per panel
SYSTEM NORMAL
10:00A 010118