Cabletron Systems SmartCell 6A000 User Manual page 73

Switch Administration
Enter the command to enable the core dump feature. For example,
set CoreDump
SmartCell ZX # set coredump
EnableCoreDump(n)
ServerIP()
CoreDumpFile()
userName()
UserPassword()
SmartCell ZX #
Note The
files. If your server does not run FTP, create these files manually. Then execute the
set CoreDump
Note On UNIX systems, make sure that the permissions are set correctly so that data
can be written.
Note For security, the
to create the core dump files. Your password is then dropped from system
memory.
To see the current core dump configuration, enter the
SmartCell ZX # show coredump
Core Dump Enabled : Yes
Core Dump Server IP : 204.95.77.240
Core Dump File : /tftpboot/bobr/core
SmartCell ZX #
: y
: 204.95.77.240
: /tftpboot/bobr/core
: bobr
:
command uses FTP to create the core_cpu and core_cmn
set CoreDump
command.
set CoreDump
< "y" to enable core dump feature
< IP address of my TFTP server
< full path name for core dump files
< login name on the server
< password
command retains your password only long enough
command.
show coredump
Saving Core Dumps
SmartCell 6A000 User Guide 4-31