Activate Incomplete Raid Set - Areca ARC-1880 Series User Manual

I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

3.7.2.5 Activate Incomplete Raid Set

The following screen is used to activate the RAID set after one
of its disk drive was removed in the power off state.
When one of the disk drives is removed in power off state, the
RAID set state will change to "Incomplete State". If user wants
to continue to work while the 6Gb/s SAS RAID controller is pow-
ered on, the user can use the "Activate Incomplete Raid Set" op-
tion to active the RAID set. After user selects this function, the
RAID state will change to "Degraded Mode" and start to work.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
BIOS CONFIGURATION
Areca Technology Corporation RAID Controller
Raid Set Function
Create Raid Set
Delete Raid Set
Offline Raid Set
Are you Sure?
Expand Raid Set
Select Raid Set To Offline
Offline Raid Set
Offline Raid Set
Yes
Raid Set #
Activate Raid Set
No
Create Hot Spare
Delete Hot Spare
Rescue Raid Set
Raid Set Information
Areca Technology Corporation RAID Controller
Raid Set Function
Create Raid Set
Delete Raid Set
Expand Raid Set
Select Raid Set To Activate
Offline Raid Set
Activate Raid Set
Activate Raid Set
Create Hot Spare
Delete Hot Spare
Rescue Raid Set
Raid Set Information
Yes
es
000
No
Raid Set # 000
57