Making Volume Sets Available To Mac Os X - Areca ARC-1880 Series User Manual

DRIVER INSTALLATION
5. A reboot is required to complete the installation (This will start
the ArcHTTP so RAID Console can be used).
6. Normally archttp64 and arc_cli are installed at the same time
on 6Gb/s SAS RAID controller. Once archttp and arc_cli have been
installed, the archttp background task automatically starts each
time when you start your computer. There is one MARID icon
showing on your desktop. This icon is for you to start up the
McRAID storage manager (by archttp) and arc_cli utility. You can
also only upgrade the driver (using ArcMSR-x....x.dmg file),
archttp or arc_cli individual item that resides at <CD-ROM>\pack
-ages\MacOS directory.
When you click the archttp from version 2.0, it shows all RAID
adapters available on the system and create a individual adapter
icon located on left column of the "Archttp Configurations" screen.
This adapter icon is for user to launch the selected RAID adapter
web browser RAID manager.
If there is any RAID adapter missed on the system start-up, you
can use the "Rescan Device" function. See chapter 5 in this
manual for information on customizing your RAID volumes using
McRAID storage manager.

4.6.2 Making Volume Sets Available to Mac OS X

When you create a volume through McRAID storage manager, the
Mac OS X recognizes that a new disk is avail, and displays a mes
sage asking what you next want to do. If the message does not
show up, start the "Macintosh Disk Utility" manually from the
"Finder", use the "Go" menu and open the "Utilities" folder. Dou
106