Areca ARC-1880 Series User Manual page 39

HARDWARE INSTALLATION
The software components configure and monitor the 6Gb/s SAS
RAID controllers as following table.
Configuration Utility
McBIOS RAID Manager
McRAID Storage Manager
(Via Archttp proxy server)
McRAID Storage Manager
(Via Ethernet port)
SAP Monitor (Single Admin Portal to
scan for multiple RAID units in the net-
work, via ArcHttp proxy server)
SNMP Manager Console Integration
McRAID Storage Manager
Before launching the firmware-embedded web server, McRAID
storage manager through the PCIe bus, you need first to install the
ArcHttp proxy server on your server system. If you need additional
information about installation and start-up of this function, see the
McRAID Storage Manager section in Chapter 6.
SNMP Manager Console Integration
There are two ways to transport SNMP data on the 6Gb/s SAS RAID
controller:In-Band PCIe host bus interface or Out-of-Band built-
in LAN interface. Enter the "SNMP Tarp IP Address" option on the
firmware-embedded SNMP configuration function for user to select
the SNMP data agent-side communication from the Out-of-Band
built-in LAN interface. To use In-Band PCIe host bus interface, keep
blank on the "SNMP Tarp IP Address" option.
Operating System supported
OS-Independent
Windows 7/2008/Vista/XP/2003, Linux,
FreeBSD, Solaris and Mac
OS-Independent
Windows 7/2008/Vista/XP/2003
Windows 7/2008/Vista/XP/2003, Linux
and FreeBSD
39