For Linux - Areca ARC-1880 Series User Manual

ARCHTTP PROXY SERVER INSTALLATION
From Arcpttp version 2.0, there "Areca RAID Controller" icon bar
window start appearing in the taskbar, double-click to launch
the ArcHTTP Configuration screen. Or click on the "Start" but-
ton in the Windows task bar and then click "Program", select the
"McRAID" and run " Archttp proxy server". The ArcHTTP Configu-
rations dialog box appears.
When you click the archttp from version 2.0, it shows all RAID
adapters available on the system and create a individual adapt-
er icon located on left column of the "Archttp Configurations"
screen. This adapter icon is for user to launch the selected RAID
adapter web browser RAID manager.
(1). See the next chapter detailing the McRAID Storage Manager
to customize your RAID volume set.
(2). If you need to configure the "System Function" of ArcHTTP,
please refer to section 5.6 ArcHttp Configuration.

5.2 For Linux

You should have administrative level permissions to install 6Gb/
s SAS RAID software. This procedure assumes that the 6Gb/s SAS
RAID hardware and Linux are installed and operational in your
system.
The following details the Linux installation procedure of the SATA
RAID controller software.
The ArcHttp proxy server is provided on the software CD delivered
with 6Gb/s SAS RAID controller card or download from the www.
areca.com.tw. The firmware embedded McRAID storage manager
can configure and monitor the 6Gb/s SAS RAID controller via
ArcHttp proxy server.
110