Ethernet Configuration; Dhcp Function - Areca ARC-1880 Series User Manual

BIOS CONFIGURATION

3.7.7 Ethernet Configuration

Use this feature to set the controller Ethernet port configuration.
It is not necessary to create reserved disk space on any hard disk
for the Ethernet port and HTTP service to function; these func-
tions are built into the controller firmware.move the cursor bar to
the main menu "Ethernet Configuration Function" item and then
press the Enter key. The "Ethernet Configuration" menu appears
on the screen. Move the cursor bar to an item, then press Enter
key to select the desired function.

3.7.7.1 DHCP Function

DHCP (Dynamic Host Configuration Protocol) allows network ad-
ministrators centrally manage and automate the assignment of
IP (Internet Protocol) addresses on a computer network. When
using the TCP/IP protocol (Internet protocol), it is necessary for
a computer to have a unique IP address in order to communi-
cate to other computer systems. Without DHCP, the IP address
must be entered manually at each computer system. DHCP lets
a network administrator supervise and distribute IP addresses
from a central point. The purpose of DHCP is to provide the
automatic (dynamic) allocation of IP client configurations for a
specific time period (called a lease period) and to minimize the
work necessary to administer a large IP network. To manually
configure the IP address of the controller, move the cursor bar
to DHCP Function item, then press Enter key to show the DHCP
setting. Select the "Disabled" or "Enabled" option to enable or
90
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw