Areca ARC-1880 Series User Manual page 160

APPENDIX
A:\nflash
Raid Controller Flash Utility
V1.11 2007-11-8
Command Usage:
NFLASH FileName
NFLASH FileName /cn --> n=0,1,2,3 write binary to controller#0
FileName May Be ARC1880FIRM.BIN or ARC1880*
For ARC1880* Will Expand To ARC1880BOOT /FIRM/BIOS.BIN
A:\>nflash arc188~1.bin
Raid Controller Flash Utility
V1.11 2007-11-8
MODEL : ARC-1880
MEM FE620000 FE7FF000
File ARC188~1.BIN : >>*** => Flash 0K
A-4 Upgrading Firmware Through CLI
This Command Line Interface (CLI) provides you to configure and
manage the 6Gb/s SAS RAID controller components in Windows,
Linux, FreeBSD and more environments. The CLI is useful in en-
vironments where a graphical user interface (GUI) is not avail-
able. Through the CLI, you perform firmware upgrade that you can
perform with the McRAID storage manager GUI. The controller has
added protocol on the firmware for user to update the controller
firmware package(BIOS, BOOT, FIRM and MBRO) through the util-
ity.
To update the controller firmware, follow the procedure below:
Parameter:<path=<PATH_OF_FIRMWARE_FILE>>
Fn: Firmware Updating.
Ex: Update Firmware And File Path Is In [C:\FW\ARC1880FIRM.BIN.]
Command: sys updatefw path=c:\fw\arc1880firm.bin [Enter]
160