Areca ARC-1880 Series User Manual page 171

b). Mark the check box on the 'SNMP Through PCI Inband" setting
and keep space (or zero) on all "SNMP Tarp IP Address" options.
c). Installing the SNMP extension agent on the server
Please refer to next section of SNMP Extension Agent Installation
for different operation system such as Windows, Linux and Free-
BSD.
C-3-4 SNMP Extension Agent Installation
The SNMP extension agent on the device is able to return mean-
ingful, highly useful information to the SNMP manager. The Areca
RAID controllers have supported the extension agent for Win-
dows, Linux and FreeBSD. This section is the detail procedures for
those extension agent installation.
C-3-4-1 Windows
You must have administrative level permission to install 6Gb/s
SAS RAID controller extension agent software. This procedure
assumes that the RAID hardware and Windows are both in-
stalled and operational in your system.
To enable the SNMP agent for Windows, configure Windows for
TCP/IP and SNMP services. The Areca SNMP extension agent file
is ARCSNMP.DLL.
Screen captures in this section are taken from a Windows XP
installation. If you are running another version of Windows, your
screens may look different, but the Areca SNMP extension agent
installation is essentially the same.
1. Insert the Areca RAID controller software CD in the CD-ROM
drive.
2. Run the setup.exe file that resides at: <CD-ROM>\packages\
windows\SNMP\setup.exe on the CD. (If SNMP service was not
installed, please install SNMP service first.)
APPENDIX
171