Mcbios Raid Manager - Areca ARC-1880 Series User Manual

BIOS CONFIGURATION
Use the Up and Down arrow keys to select the controller you want
to configure. While the desired controller is highlighted, press the
Enter key to enter the main menu of the McBIOS RAID manager.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

3.2 McBIOS RAID manager

The McBIOS RAID manager is firmware-based and is used to con-
figure RAID sets and volume sets. Because the utility resides in the
6Gb/s SAS RAID controller firmware, operation is independent of
any operating systems on your computer. This utility can be used
to:
• Create RAID sets,
42
Areca Technology Corporation
Select An Adapter To Configure
( 001/ 0/0) I/O=28000000h, IRQ = 9
ArrowKey Or AZ:Move Cursor, Enter: Select, **** Press F10 (Tab) to Reboot ****
Verify Password
RAID Setup <V1.40, 2006/08/8>
Note:
T h e m a n u f a c t u r e
default password is
set to 0000; this
p a s s w o r d c a n b e
modified by selecting
Change Password
in the Raid System
Function section.