Areca ARC-1880 Series User Manual page 49

4). If you need to add an additional volume set, use the main
menu "Create Volume Set" function.
The total number of physical drives in a specific RAID set deter-
mine the RAID levels that can be implemented within the RAID
set. Select "Quick Volume/Raid Setup" from the main menu; all
possible RAID level will be displayed on the screen.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
If volume capacity will exceed 2TB, controller will show the
"Greater Two TB Volume Support" sub-menu.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
• No
It keeps the volume size with max. 2TB limitation.
• Use 64bit LBA
This option use 16 bytes CDB instead of 10 bytes. The maximum
volume capacity up to 512TB.
BIOS CONFIGURATION
Areca Technology Corporation RAID Controller
Total 5 Drives
Raid 0
Raid 1 + 0
Raid 1 + 0 + Spare
Raid 3
Raid 5
Raid 3 + Spare
Raid 5 + Spare
Raid 6
Raid 6 + Spare
Areca Technology Corporation RAID Controller
Greater Two TB Volume Support
Total 5 Drives
Raid 0 Raid 0
Raid 1 + 0
Raid 1 + 0 + Spare
Raid 3
Raid 5
Raid 3 + Spare
Raid 5 + Spare
Raid 6
Raid 6 + Spare
No
No
Use 64bit LBA
Use 4K Block
49