Internal Min Sas 4I (Sff-8087) To Internal Min Sas 4I (Sff-8087) Cable - Areca ARC-1880 Series User Manual

HARDWARE INSTALLATION
Figure 2-10, Min SAS 4i to 4xSFF-8482 cable
2.4.3 Internal Min SAS 4i (SFF-8087) to Internal
Min SAS 4i (SFF-8087) cable
The 6Gb/s SAS RAID controllers have 1-6 Min SAS 4i internal
SFF-8087 connectors, each of them can support up to four SAS/
SATA signals. These controllers can be installed in a server RAID
enclosure with Min SAS 4i internal connectors backplane. This
Min SAS 4i cable has eight signal pins to support four SAS/SATA
drives and six pins for the SGPIO (Serial General Purpose Input/
Output) side-band signals. The SGPIO bus is used for efficient
LED management and for sensing drive Locate status.
Figure 2-11, Min SAS 4i to Min SAS 4i cable
32