Areca ARC-1880 Series User Manual page 114

ARCHTTP PROXY SERVER INSTALLATION
• Mail (alert by Mail) Configuration:
To enable the controller to send the email function, you need to
configure the SMTP function on the ArcHttp software. To enable
the RAID controller email sending function, click on the "Mail Con-
figuration" link. The "SMTP Server Configurations" menu will show
as following:
When you open the mail configuration page, you will see following
settings:
(1). SMTP Server Configuration:
SMTP Server IP Address: Enter the SMTP server IP address which is
not MCRAID manager IP. Ex: 192.168.0.2.
(2). Mail Address Configurations:
Sender Name: Enter the sender name that will be shown in the
outgoing mail.Ex: RaidController_1Mail address: Enter the sender
email that will be shown in the outgoing mail, but don't type IP to
replace domain name. Ex: RaidController_1@areca.com.tw
Account: Enter the valid account if your SMTP mail server need
authentication.
Password: Enter the valid password if your SMTP mail server need
authentication.
MailTo Name: Enter the alert receiver name that will be shown in
the outgoing mail.
Mail Address: Enter the alert receiver mail address
Ex: admin@areca.com.tw
114