Areca ARC-1880 Series User Manual page 13

RAID Features
• RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60, Single Disk or JBOD
• Multiple RAID selection
• Online array roaming
• Offline RAID set
• Online RAID level/stripe size migration
• Online capacity expansion and RAID level migration simultane-
ously
• Online volume set growth
• Instant availability and background initialization
• Support global and dedicated hot spare
• Automatic drive insertion/removal detection and rebuilding
• Greater than 2TB capacity per disk drive support
• Greater than 2TB per volume set (64-bit LBA support)
• Support intelligent power management to save energy and
extend service life
• Support NTP protocol synchronize RAID controller clock over the
on board Ethernet port
Monitors/Notification
• System status indication through global HDD activity/fault con-
nector, individual activity/fault connector, LCD/I2C connector and
alarm buzzer
• SMTP support for email notification
• SNMP support for remote manager
• Enclosure management (SES-2, SMP and SGPIO) ready
RAID Management
• Field-upgradeable firmware in flash ROM
In-Band Manager
• Hot key "boot-up" McBIOS RAID manager via M/B BIOS
• Web browser-based McRAID storage manager via ArcHttp proxy
server for all operating systems
• Support Command Line Interface (CLI)
• API library for customer to write monitor utility
• Single Admin Portal (SAP) monitor utility
Out-of-Band Manager
• Firmware-embedded web browser-based McRAID storage man-
ager, SMTP manager, SNMP agent and Telnet function via
Ethernet port
INTRODUCTION
13