Create Raid30/50/60 (Volume Set 30/50/60) - Areca ARC-1880 Series User Manual

3.7.3.2 Create Raid30/50/60 (Volume Set
30/50/60)
To create 30/50/60 volume set from RAID set group, move
the cursor bar to the main menu and click on the "Create
Raid30/50/60" link. The "Select The Raid Set To Create Volume
On It" screen will show all RAID set number. Tick on the RAID
set numbers (same disk No per RAID set) that you want to cre-
ate and then click on it.
The created new volume set attribute option allows users to
select the Volume Name, Capacity, Raid Level, Strip Size, SCSI
ID/LUN, Cache Mode, and Tagged Command Queuing. The
detailed description of those parameters can refer to section
3.7.3.1. User can modify the default values in this screen; the
modification procedures are in section 3.7.3.4.
I/O Port Addr : 28000000h, F2(Tab): Select Controller, F10: Reboot System
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function Volume Set Function
Physical Drives
Raid System Function
Hdd Power Management
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Note:
Raid Level 30 50 and 60 can support up to eight RAID sets
(four pairs).
BIOS CONFIGURATION
Areca Technology Corporation RAID Controller
Volume Set Functions
Create Raid 30/50/60
Create Volume Set
Create Raid30/50/60
Creat Raid30/50/60
[*] Raid Set # 000 3000.0GB (3000.0GB)
[*] Raid Set # 000 3000.0GB (3000.0GB)
Delete Volume Set
[*] Raid Set # 001 1000.0GB (8000.0GB)
Modify Volume Set
[ ] Raid Set # 003 150.0GB ( 240.0GB)
Check Volume Set
[ ] Raid Set # 004 150.0GB ( 240.0GB)
Stop Volume Check
[ ] Raid Set # 005 150.0GB ( 240.0GB)
Display Volume Info.
[ ] Raid Set # 006 150.0GB ( 240.0GB)
[ ] Raid Set # 007 150.0GB ( 240.0GB)
Free(Capacity)
69