Sending In Device; Maintaining The Reusable Hose System - Weinmann MEDUMAT Standard2 Instructions For Use Manual

Part concerned
Accessories (e.g., charging station)

11.3 Sending in device

11.4 Maintaining the reusable hose system

Requirement
Interval
There are individual intervals for the different accessories. Please refer
to the instructions for use supplied with the accessories.
In addition, the following applies for the Federal Republic of Germany:
In accordance with the safety check (STK) regulation in Section 11 of
the German regulations governing owners/operators of medical devices
(MPBetreibV) as applicable in countries governed by German
legislation, we as the manufacturer recommend that the patient hose
system connected to MEDUMAT Standard
subjected to a safety check every two years.
Risk of infection due to contaminated parts during
maintenance work!
The device, components and accessories may be contaminated,
and infect the technicians with bacteria or viruses.
⇒ Clean and disinfect the device, components and accessories.
⇒ Do not send in parts which are potentially contaminated.
1. Remove components and accessories.
2. Clean and disinfect the device, components and accessories
(see "8.3 Preparing hygienic reprocessing", page
3. Send in the device and, if necessary, components and
accessories to WEINMANN Emergency or a technician
specifically authorized by WEINMANN Emergency.
If you send in parts which are visibly contaminated, they will be
disposed of by WEINMANN Emergency or a technician specifically
authorized by WEINMANN Emergency at your expense.
The reusable hose system has been disassembled
(see "8.4 Disassembly of the reusable hose system", page
1. Check all parts of the reusable hose system for external
damage and complete labeling.
If necessary: Replace damaged or incorrectly labeled parts.
Maintenance by
2
for use of the latter be
MEDUMAT Standard
11 Maintenance
176).
177).
2
EN 225