Disassembly Of The Reusable Hose System - Weinmann MEDUMAT Standard2 Instructions For Use Manual

8.4 Disassembly of the reusable hose
system
The images in this subchapter show all the possible components of
the reusable hose system. Depending on the system type, your
reusable hose system may not include certain components
(see "3.5.2 Reusable hose system and disposable hose system",
page
Requirement •
•
Material damage from pulling out the hoses incorrectly!
The hoses may be damaged if pulled out incorrectly.
⇒ Hold the end of the hose when pulling out!
1. Open the hose protection sleeve.
2. Open the Velcro fasteners in the hose protection sleeve.
3. If available: Detach the water filter from the measuring hose
4. If available: Detach the water filter from the CO
35).
The device is disconnected from the patient hose system.
The patient is disconnected from the patient hose system.
system connector.
hose.
8 Hygienic reprocessing
MEDUMAT Standard
measuring
2
2
EN 177