Table of Contents
Advertisement
We recommend regular maintenance of the
system prior to the start of the season. Mainte‐
nance should include:
Functional control of the system.
n
Maintenance of the pH and ORP sensors.
n
Calibration of the pH and ORP sensors.
n
Maintenance of both peristaltic pumps.
n
Inspection and maintenance of the injec‐
n
tion valves.
Inspection and maintenance of the suction
n
assemblies.
The peristaltic pumps and the entire
n
system need to be commissioned in
accordance with the operating instructions.
Checking of the values set on the Splash
n
Control 2 controller.
Should you be considering switching the
system over to other chemicals, then you need
to ask advice and agree the compatibility of the
chemicals with the system with the supplier of
the system.
11.5
Decommissioning the
Splash Control 2 con‐
troller
User qualification: trained user
n
2.4 'User qualification' on page 15 .
Following decommissioning of the
Splash Control 2 controller, the swim‐
ming pool system will no longer be
regulated and no chemicals will be
metered. Provide for proper water
hygiene if you wish to continue oper‐
ating the swimming pool.
Decommissioning is possible at any time. Pro‐
ceed as follows:
1.
2.
3.
4.
Ä Chapter
Maintenance and repair
No control and metering function
Disconnect the system from the power
supply.
Shut off the sample water supply and
return line.
Depressurise all lines.
Ä Chapter 12
Note the following:
'Operational pause (e.g. over-wintering)'
on page 69
67
Advertisement
Table of Contents
