ProMinent Splash Control 2 Assembly And Operating Instructions Manual page 54

Operation and user interface
Pause
input
Inactive
Water flow
input
Inactive
Delay
OFF
Metering
direction
UP
Cycle time
80 s
Fig. 38: General settings functions.
# Functions
1 This key is used to activate or deactivate the
you select the direction of the NO or NC contact.
2 This key is used to activate or deactivate the
you select the direction of the NO or NC contact.
3 This key is used to set the contact
[OFF] . The delay can be set to up to 240 seconds.
is set to
4 This key is used to set the
tion can either be "upwards" or "downwards".
5 This key is used to set the cycle time of the metering pump. This time can be set at between
10 ... 1800 seconds.
54
Pause Pause
input input
Active - NO Active - NC
Water flow Water flow
input input
Active - NO Active - NC
Delay
80 s
Metering
direction
DOWN
[Delay] input. The delay can be deactivated when the delay
[Metering direction] of the measuring channel. The metering direc‐
1
2
3
4
5
[Remote control contact] input. This key also lets
[Flow switch contact] input. This key also lets
A2834