Certificates And Approvals - Siemens LOGO! CIM Operating Manual

Technical specifications

7.2 Certificates and approvals

Technical specifications - LOGO! CIM
Radiated electromagnetic field
Conducted disturbance
Fast transient bursts
Surge immunity
Design, dimensions and weight
Design
Pollution degree
Weight
Dimensions (W x H x D)
Materials
7.2 Certificates and approvals
Note
Applicability
The following shows the approvals that may be available. For the device itself, it is
certificated as shown on the product label and package label.
ISO 9001 certificate
The Siemens quality management system for all production processes (Development,
Production, Sales and Service of Automation Products, -Systems and -Solutions) meets the
requirements of ISO 9001:2015
This has been certified by DQS (the German society for the certification of quality
management systems).
Certificate registration no. 001323 QM15.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
80
IEC 61000-4-3 80 MHz - 1000MHz 10V/m, 80% AM
(1kHz) 1,4 GHz - 6,0 GHz 3V/m, 80% AM
(1kHz)
IEC 61000-4-6 150 KHz-80 MHz
10 V, 80%AM(1 kHz)
IEC 61000-4-4
• For power port: ±2kV,5kHz and
100kHz
• For signal port:
–
–
• ±0.5 kV line-to-line
• ±1 kV line-to-earth
Compact design, for DIN rail or wall mounting
IP20
200 g
71.5 x 90 x 58.1 mm (without antenna sockets)
Plastic
Operating Manual, 10/2021, A5E51250518-AA
Signal Lines<30 m: ±1 kV/5 kHz and
100 kHz
Signal Lines>30 m: ±2 kV/5 kHz and
100 kHz
LOGO! CIM