Siemens LOGO! CIM Operating Manual page 14

Application and functions
1.4 Application example
LWE project on AWS Could
For how to create and deploy a LWE project on AWS Cloud, refer to "LOGO! Web Editor Online
Help".
Set the CIM
Requirements
• Antenna (Page 38), SMA connector (Page 33), cellular module (Page 36) and SIM card
(Page 34) is installed.
Procedure
1. Downloading and installing the certificate (Page 41).
2. Accessing web-based configuration from PC (Page 44).
3. Configure the Cellular and GNSS (Page 67).
4. Configure the connection (Page 55) of CIM to the onsite device as you need.
5. Create a variable (Page 49) for the liquid level.
6. Create a contact (Page 48) for receiving the short message.
7. Create a message (Page 50) for informing the abnormal liquid level.
8. Bind the event (Page 52) "abnormal liquid level" with an action "send message".
Set the onsite device
To setup the communication from CIM and the onsite device, refer to the documentation for
onsite device and do the settings accordingly.
14
Operating Manual, 10/2021, A5E51250518-AA
LOGO! CIM