Certificates And Licenses; Certificates, Approvals, Standards - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Certificates and Licenses

B.1

Certificates, approvals, standards

Note
Approvals are only valid when marked on the product
The specified approvals apply only when the corresponding mark is printed on the product. You
can check which of the following approvals have been granted for your product by the markings
on the type plate.
CE marking
The SIMOTICS CONNECT 400 product complies with the requirements and protective goals
of the following EU Directives.
RED Directive 2014/53/EU
The product is designed for use in an industrial environment.
Safety and security requirements
EMC standards
Efficient use of a spectrum
The product meets these requirements if you adhere to the installation guidelines and safety
instructions included in these operating instructions during installation and operation.
Declaration of Conformity
The EU Declaration of Conformity is kept available for the responsible authorities in
accordance with the above-mentioned EU Directive at the following address:
SIEMENS AG
Vogelweiherstr. 1-15
DE-90441 Nuremberg, Germany
Further applied standards
Assessment of electrical and electronic devices regarding restricting hazardous substances:
● RoHS Directive RoHS 2011/65/EU
● EN50581 2012
SIMOTICS CONNECT 400
Operating Instructions, 07/2019
EN 62368-1 2014+A11:2017
EN 62311 2008
EN 309 489-1 V2.2.0 Draft 2017
EN 301 489-17 V3.2.0 Draft 2017
EN 300 328 V2.2.1
B
49