Technical Specifications; Standards And Approvals - Siemens S7-1500 Manual

Technical specifications

Introduction
The technical specifications contain:
● The standards and test values satisfied by the terminal modules of the
● The technical specifications for the components of the SIMATIC TOP connect system
Technical specifications of the I/O modules
The technical specifications of the I/O modules are also available in the product manuals for
the relevant modules. Please see the overview of documentation on SIMATIC TOP connect
system cabling under Documentation guide (Page 9).
If the information in this document differs from that in the product manuals, the product
manuals take priority.
See also
Documentation guide (Page 9)
6.1

Standards and approvals

Introduction
This section sets out the standards and test values satisfied by the terminal modules of the
SIMATIC TOP connect system cabling.
Note
Components of the SIMATIC TOP connect system cabling
The valid marks and approvals are printed on the components of the SIMATIC TOP connect
system cabling.
Reference
The corresponding certificates for the marks and approvals can be found on the Internet
under Service & Support (http://www.siemens.com/automation/service&support).
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,
SIMATIC TOP connect system cabling.
cabling.
6
49