Application Example; Fill Control - Siemens LOGO! CIM Operating Manual

1.4

Application example

1.4.1

Fill control

Requirements for a fill system
This example illustrates a fill system. We want to monitor and control the whole system
anywhere through a web browser. We want to be informed with short message if the liquid
level is abnormal.
Setup
We need a CIM to connect the onsite devices. The onsite devices can be LOGO! BM or Modbus
RTU devices.
LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA
Application and functions
1.4 Application example
13