Technical Specifications; Certificates And Approvals - Siemens SIMATIC IOT2000 Series Operating Instructions Manual

Technical specifications

4.1

Certificates and approvals

Note
Applicability
The following shows the approvals that may be available. For the device itself, it is
certificated as shown on the product label and package label.
ISO 9001 certificate
The SEWC quality management system for all production processes (development,
production and sales) meets the requirements of GB/T 19001-2008/ISO 9001:2008, ISO
14001:2004 + Cor. 1:2009 and BS OHSAS 18001:2007.
This has been certified by TÜV.
Certificate registration no. 01 100 1430201, 01 104 1430201 and 01 113 1430201.
Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
The device meets the guidelines listed in the following sections.
EC Declaration of Conformity
The associated declaration of conformity is available on the Internet at the following address:
EU Declaration of Conformity
(https://support.industry.siemens.com/cs/ww/en/ps/16739/cert).
UL approval
The following approvals are available for the device:
● Underwriters Laboratories (UL) in accordance with standard UL61010-2-201
(IND.CONT.EQ), File E472609
● Canadian National Standard CAN/CSA-C22.2 No. 61010-2-201
Australia and New Zealand
This product meets requirements of EN IEC 61000-6-4:2011 Generic standard.
IOT2000 Extension Modules
Operating Instructions, 2018/05, A5E39456816-AB
4
25