Gnss Settings; Security; Protocol - Siemens LOGO! CIM Operating Manual

5.4.7.3

GNSS settings

This page displays the position settings.
Current position
You can check the current latitude and longitude for CIM.
Position settings
You can enable or disable "Map to UDM" in this field.
By clicking "Position Address Space Info", you can view the position address space information
in UDM.
5.4.8

Security

5.4.8.1

Protocol

This page allows you check and manage all the protocols. You can enable/disable a protocol
by toggling the switch. Except HTTPS, all other protocols are disabled by default.
Enable S7/Modbus TCP/Modbus RTU/NTP
When you enable the protocols, the settings of these protocols revert to the settings before
disabling.
Disable S7/Modbus TCP/Modbus RTU/NTP
if you disabled a protocol, CIM cannot work as either a server or a client.
Note
RESTful API has no authentication
RESTful API is not safe. If you enabled the RESTful API, a device can connect to CIM by Restful
API without authentication.
Only enable the RESTful API when needed.
LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA
Web-based configuration
5.4 Web pages
69