Siemens LOGO! CIM Operating Manual page 85

Specific Conditions of Use:
• The equipment shall only be used in an area of at least pollution degree 2, as defined in
EN 60664-1.
• The equipment shall be installed in an enclosure that provides a minimum ingress
protection of IP 54 in accordance with EN 60079-0 and accessible only by the use of a
tool.
• Transient protection shall be provided that is set at a level not exceeding 140 % of the
peak rated voltage value at the supply terminals to the equipment.
• Antenna shall be installed within the end use enclosure. Routing and remote installation
(not evaluated as part of this certification) of the antenna shall be in accordance with the
appropriate location regulations when installed in unclassified and/or zone 2 Hazardous
Locations.
Korea Certificate
This product meets the requirements of Korean certification.
This product satisfies the requirement of the Korean Certification (KC Mark).
RCM (Australia / New Zealand)
This product meets the requirements of IEC/EN 61000-6-3 Generic standards - Emission
standard for residential, commercial and light-industrial environments.
This product meets the requirements of the standard IEC/EN 61000-6-3 Generic standards -
Emission standard for residential, commercial and light-industrial environments.
Marine approvals
Acceptance procedures for shipping and offshore applications:
• ABS American Bureau of Shipping (USA)
• BV Bureau Vertias (France)
• DNV GL (Norway/Germany)
• LR (Lloyds Register of Shipping)
• KR (Korea Register of Shipping)
• Class NK Nippon Kaiji Kyokai (Japan)
• China Classification Society (CCS)
LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA
Technical specifications
7.2 Certificates and approvals
85