Siemens LOGO! CIM Operating Manual page 53

Bind data
1. Click "Add Row" to add a new row.
2. Click the "Event Type" drop-down list to choose and event.
Note
The event "Greater than" is triggered on the rising edge, while "Less than" is triggered on
the falling edge.
3. Configure the event, it can be change of a variable (Page 49) or receive Messages (Page 50)
from a contact (Page 48).
If there is no variable or message meet your requirement in the list, you can add variable
or message on top of the list.
LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA
Event
1 Changes from 1 to 0
2 Changes from 0 to 1
3 Value Changed
4 Greater than
5 Equals
6 Less than
7 Receives message
No event triggered.
Event "Greater than 5" is triggered.
Event "Equals 5" is triggered.
Event "Less than 5" is triggered.
Event Source restriction
source
Variable Permitted data type: bool
Permitted data type: all UDM permitted data type ex-
cept bool.
Permitted data type: all UDM permitted data type ex-
cept bool.
Note: The type and range of the reference value
should be the same as event source variable.
Message Any message
Web-based configuration
5.4 Web pages
53