Siemens LOGO! CIM Operating Manual page 51

Add a message
1. Click "Add Row".
2. Enter the title and message text. You can add maximumly 8 messages. A title and message
text can contain letters, numbers and special characters.
Title: The title of the message.
Message text: the content of the message.
3. Toggle on "With parameter" as you need.
Note
If you toggled on "with parameter", the variable value of the bind event will be added in
the message CIM sends. If the parameter is in hexadecimal, 0x is also added before the
value.
• Message content with parameter: message text + value of the parameter.
• Message content with parameter in hexadecimal: message text + 0x+value of the
For the allowed parameters, refer RESTful API (Page 64).
4. Repeat the steps 1-3 to add all messages you need.
Note
If the message is referred by an event or an action, the message cannot be changed or
deleted.
Change a message
Click
Delete a message
Click
LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA
parameter.
for you message you want to change, then enter the new name and message text.
for the message you want to delete.
Web-based configuration
5.4 Web pages
51