5.3
Mounting on DIN rails
Mounting
①
Figure 5-3
To install the module on a 35 mm DIN rail complying with DIN EN 60715, follow the steps
below:
1. Fit the upper securing hooks of the module onto the top of rail
2. Push the module down against rail until it locks in place
Removal
To remove the module from a DIN rail, follow the steps below:
1. Pull the locking slide on the bottom of the module downwards.
2. Pull the lower part of the device away from the DIN rail.
Optical link module
Operating Instructions, 01/2020, C79000-G8976-C270-06
Locking slide
Mounting a module on a DIN rail
5.3 Mounting on DIN rails
①
.
②
.
Mounting
37