Use Vertical Position And Scale Knobs; How To Set The Horizontal System - Owon SDS1000 User Manual

aliasing. So pay more attention to the relation between the frequency being
sampled and measured.

Use Vertical Position and Scale Knobs

1. The Vertical Position knob is used to adjust the vertical positions of the
waveforms.
The analytic resolution of this control knob changes with the vertical
division.
2. The Vertical Scale knob is used to regulate the vertical resolution of the
wave forms. The sensitivity of the vertical division steps as 1-2-5.
The vertical position and vertical resolution is displayed at the left bottom
corner of the screen (see Figure 4-1).
Figure 4-1 Information about Vertical Position

How to Set the Horizontal System

The HORIZONTAL CONTROLS includes the Horizontal HOR button and
such knobs as Horizontal Position and Horizontal Scale.
1. Horizontal Position knob: this knob is used to adjust the horizontal
positions of all channels (include those obtained from the mathematical
manipulation), the analytic resolution of which changes with the time base.
2. Horizontal Scale knob: it is used to set the horizontal scale factor for
setting the main time base or the window.
3. Horizontal HOR button: push it to switch between the normal mode and
the wave zoom mode. For more detailed operations, see the introductions
4.Advanced User Guidebook
23