Multifunction Gauge Features - BRP CAN-AM OUTLANDER 6x6 2017 Series Operator's Manual

MULTIFUNCTION GAUGE
NOTE: If the letter "E" is displayed
in the transmission position display, it
means that there is a electrical commu-
nication error. Contact an authorized
Can-Am dealer.
Fuel Level Display
Bar gauge continuously indicates the
fuel level in the fuel tank.
vmo2012-012-029_n
1. Fuel level display
Low fuel level Indicator Lamp
When this indicator turns ON, it indi-
cates that there is approximately 5 L
(1.3 U.S. gal.) of fuel left in fuel tank.
6WD Indicator Lamp
When this indicator is ON, it indicates
the 6WD system is activated.
Parking Brake Indicator Lamp
When this indicator is ON, it indicates
the brake is activated for more than 15
seconds (while riding).
______________
94
High Beam Indicator Lamp
When this indicator is ON, it indicates
that high beam is selected.
Check Engine Indicator Lamp
When this indicator is ON, it indicates
an engine fault code, look for a mes-
sage at the LCD display.
TROUBLESHOOTING
Refer to
for more details.
Multifunction Gauge
Features
WARNING
Never adjust or set functions on
the multifunction gauge while rid-
ing the vehicle.
The modes can be displayed by press-
ing the selector button.
NOTE: An abbreviation of the mode
selected will also be displayed in dis-
play 3 (see abbreviations in parenthe-
sis).
vmo2012-012-029_m
1. Display 2 (mode)
2. Display 3 (mode/message)
section