BRP CAN-AM OUTLANDER 6x6 2017 Series Operator's Manual page 142

MAINTENANCE PROCEDURES
vmo2012-012-056_a
TYPICAL - 650 ENGINE
1. Drain plug
2. Oil level plug
vmo2012-012-057_a
TYPICAL - 1000 ENGINE
1. Drain plug
2. Oil level plug
The oil should be level with the bottom
of the oil level hole.
Refill as required until gearbox oil level
flows through oil level hole.
Recommended Gearbox Oil
RECOMMENDED
ENGINE
PRODUCT
XPS SYNTHETIC
GEAR OIL
Within
(75W 140)
the U.S.
(P/N 293 600
140)
Outside
(P/N 619 590
of the
182)
U.S.
If the recommended oil is not available,
use a 75W140 gearbox oil that meets
the API GL-5 specification.
______________
140
QUANTITY
Approximately
450 ml
(15.22 U.S. oz)
NOTICE
Do not use another types
of oil when servicing. Do not mix
with other types of oil.
Gearbox Oil Change
NOTE: When replacing the gearbox
oil, it is recommended to clean the ve-
hicle speed sensor (VSS) at the same
time.
Place the vehicle on a level surface.
Clean drain plug area.
Clean the oil level plug area.
Under the vehicle, place a drain pan un-
derneath the oil drain plug area.
Remove the oil level plug.
Remove the gearbox drain plug.
vmo2012-012-056_a
TYPICAL - 650 ENGINE
1. Drain plug
2. Oil level plug
vmo2012-012-057_a
TYPICAL - 1000 ENGINE
1. Drain plug
2. Oil level plug
Let oil completely drain from gearbox.
Install the drain plug.
NOTE: Clean drain plug from any
metallic particles prior to installation.