BRP CAN-AM OUTLANDER 6x6 2017 Series Operator's Manual page 138

MAINTENANCE PROCEDURES
vmo2012-012-042_a
1. Engine coolant reservoir
NOTE: When checking level at tem-
perature lower than 20°C (68°F), it may
be slightly lower than MIN. mark.
Add coolant if required.
WARNING
Do not remove the coolant reser-
voir cap if engine is hot.
Use a funnel to avoid spillage. Do not
overfill.
Properly reinstall and tighten reservoir
cap.
Reinstall gauge support.
WARNING
In order to avoid potential burns,
do not remove the radiator cap if
the engine is hot.
NOTE: A cooling system that fre-
quently requires coolant is the indica-
tion of leaks or engine problems. See
an authorized Can-Am dealer.
NOTICE
Do not store any objects
under the gauge support.
______________
136
Recommended Engine Coolant
BRP
RECOMMENDED
PRODUCT
Finland, Norway
and Sweden
All other
countries
Alternative, or if
not available
NOTICE
Always use ethylene-gly-
col antifreeze containing corrosion
inhibitors specifically for internal
combustion aluminum engines.
Engine Coolant Replacement
Cooling System Draining
Remove the gauge support.
Remove the coolant reservoir cap.
WARNING
To avoid potential burns, do not
remove the pressure cap if the en-
gine is hot.
vmo2012-012-042_a
1. Engine coolant reservoir cap
COOLANT
LONG LIFE
ANTIFREEZE(F)
(P/N 619 590 204)
LONG LIFE
ANTIFREEZE
(P/N 219 702 685)
Distilled water
and antifreeze
solution (50%
distilled water,
50% antifreeze)