Komatsu PC88MR-10 Shop Manual page 1105

Threaded part of sprocket (1) mounting
bolt:
Adhesive (LT-2)
Sprocket (1) mounting bolt:
186.3 to 225.6 Nm {19 to 23 kgm}
[*2]
Threaded part of travel motor and final
drive assembly (4) mounting bolt:
Adhesive (LT-2)
Travel motor and final drive assembly (4)
mounting bolt:
235 to 285 Nm {235 to 29.5 kgm}
Bleed air from the travel motor. For details, see
"Testing and adjusting", "Bleed air from each
part".
Refilling with oil
Refill it with oil to the specified level through the
oil filler port. Run the engine to circulate the oil
through the piping, and check the oil level again.
PC88MR-10
50 Disassembly and assembly
Power train system
50-77